Adding Programs Directly From The Internet - Honeywell Dolphin 9900 User Manual

3. Depending on the program, you may need to open File Explorer on the terminal, navigate to the
folder where the program is located, and tap on the program file to install it.
• If you copied the file to the Autoinstall folder, you can either tap on the program inside the
Autoinstall folder or perform a hard reset and the program will install as part of the regular
Autoinstall; see
more information, see
After installation on the terminal is complete, tap Start > Programs and the program and its icon appears
on the Programs screen. Tap it to open the program.

Adding Programs Directly from the Internet

When selecting programs, verify that the program and version of the program are designed for Windows
!
Mobile and your processor. You can verify your processor by tapping Start > Settings > System tab > About
> Version tab. Make a note of the information in the Processor field.
1. Determine your device and processor type so that you know which version of the software to install.
Tap Start > Settings > System tab > About. On the Version tab, make a note of the information in
the Processor field.
2. Download the program to your device straight from the Internet using Pocket Internet Explorer. You
may see a single EXE or setup.exe file, or several versions of files for different device types and
processors.
3. Read any installation instructions, Read Me files, or documentation that comes with the program.
Many programs provide special installation instructions.
4. Tap the file, such as an EXE file. The installation wizard begins. Follow the directions on the screen.
5. Select the radio or radio combination and tap Apply. The Radio Manager begins enabling your radio
or radio combination.
6. When enabled, the Status field reads "Success."
Dolphin® 9900 Mobile Computer User's
Guide–Preliminary
Let Autoinstall Run on page
Hard Reset (Cold Boot)
2-3. Remember, a hard reset erases RAM data! For
on page 3-20.
Rev (a) 02
3/5/08
7 - 9