Honeywell Dolphin 9900 User Manual page 129

Using the Wall Mount Kit
Wall mount kits can be purchased separately to secure the ChargeBase to a wall or other vertical surface.
For the ChargeBase, you need to purchase two kits so that you have two mounting brackets, one for each
end of the ChargeBase. Each mounting bracket contains an open slot in the back to accommodate the
connector cables.
1. Insert the head of each screw into the round end of each of the four screw slots on the bottom panel.
Slide each screw towards the narrow end of the screw slot.
2. Use a washer/nut set on each screw to secure the screw in each slot.
3. Attach the bottom panel to the two mounting brackets.
Open Slot for Connector Cables
Dolphin® 9900 Mobile Computer User's
Guide–Preliminary
Screws in the narrow end of
Mounting Brackets
Rev (a) 02
3/5/08
Washer/Nut
12 - 7