Table of Contents
Advertisement
model no. 060-3783-4 | contact us: 1-866-523-5218
ASSEMBLING THE WHEELS (FIG. 2)
The wheels are used to control the depth of operation and for transport. to adjust the height of
the wheels:
1.
Disconnect from the power source. Allow sufficient time for moving parts to come to a
complete stop.
2.
Place tiller/cultivator in a stable position.
3.
insert the wheel assembly (1) into the support rod (2).
4.
Align the wheel assembly hole to the desired position. Slide bolt (3) through the hole and
attach the hitch pin (4) to the bolt.
5.
The highest tilling is Position A; the deepest b.
6.
The wheels can be removed for greater tilling depth.
(2) Support rod
(1) Wheel assembly
(3) Slide bolt
(4) Hitch pin
Position a - highest
Hitch pin
Position b - deepest
15
Fig. 2
Hide quick links:
Advertisement
Table of Contents
