Page 1
OWNER’S MANUAL 20-Volt Lithium-ion Pruner With (1) 20-Volt 2.0Ah Lithium-ion Battery Copyright All Rights Reserved. Model LPR020-1 | SKU# 267-3224 BATTERY MUST BE CHARGED BEFORE FIRST USE. TWO TO THREE INITIAL CHARGING/DISCHARGING CYCLES MAY BE REQUIRED TO ACHIEVE MAXIMUM RUN TIME/CAPACITY.
Any part that is damaged should be properly repaired or replaced. For assistance call our WARNING: Cancer and Reproductive Harm - customer service help line at 1-800-633-1501. www.P65Warnings.ca.gov. Model LPR020-1...
WARNING! Keep bystanders away. CAUTION! Wear ear protection WARNING! Wear safety footwear! Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice. Model LPR020-1...
To remove the ea. Never touch the blades. They are very sharp battery, depress the release button and slide battery and you may cut yourself. Always wear protective pack out of tool. gloves while pruning. Fig.1 Fig.2 Model LPR020-1...
40°C (104°F) or under direct exposure to the cutting performance of the blades. Never apply sunlight. any grease to the blades. Do not store the tool in places with static There are no parts inside the equipment which electricity. require additional maintenance. Model LPR020-1...
CHARGING THE BATTERY PACK Charge the battery pack only with Yardworks 20-Volt four weeks, before requiring charging. Chargers. Fully charge battery pack every 90 days. Allow at least 60 minutes of charge time before initial use of If over a period of time the battery pack quickly runs down the pruner.
Replacement blade 1 BL82120-1 20V battery CHL82000-1 20V charger CALL US FIRST !! Call us first with questions about operating or maintaining your product at 1.800.633.1501 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time, or get assistance on americanlawnmower.com. Model LPR020-1...
Page 10
The Great States Corp. (GSC) warrants to the original owner that this Yardworks product and service part is free from defects in materials and workmanship and agrees to repair or replace any defective product or part for the warranty period as stated above.