Electrical Connection; Speed And Wiring - Yardworks 060-3783-4 Operator's Manual

10
model no. 060-3783-4 | contact us: 1-866-523-5218

ELECTRICAL CONNECTION

This tool is powered by a precision built electric motor. it should be connected to a power
supply that is 120 volts, 60 Hz, AC only (normal household current). Do not operate
this tool on direct current (DC). A substantial voltage drop will cause a loss of power and
the motor will overheat. if the product does not operate when plugged into an outlet, double
check the power supply.

SPEED AND WIRING

The speed is not constant and decreases under a load or with lower voltage. for voltage,
the wiring in a shop is as important as the motor's horsepower rating. A line intended only
for lights cannot properly carry a cultivator motor. Wire that is heavy enough for a short
distance will be too light for a greater distance. A line that can support one cultivator may
not be able to support two or three tools.
FOR ALL DOUBLE-INSULATED APPLIANCES
Replacement Parts — When servicing use only identical replacement parts.
Polarized Appliance Connections — To reduce the risk of electric shock, this appliance
has a polarized plug (one blade is wider than the other) and will require the use of a
polarized extension cord. The appliance plug will fit into a polarized extension cord only
one way. if the plug does not fit fully into the extension cord, reverse the plug. if the plug still
does not fit, obtain a correct polarized extension cord. A polarized extension cord will require
the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way.
if the plug does not fit fully into the wall outlet, reverse the plug. if the plug still does not fit,
contact a qualified electrician to install the proper wall outlet. Do not change the equipment
plug, extension cord receptacle, or extension cord plug in any way.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE!