Preparing For Use After Storage - Yardworks 060-3783-4 Operator's Manual

model no. 060-3783-4 | contact us: 1-866-523-5218
STORING THE TILLER/CULTIVATOR
The following steps should be taken before storing the tiller/cultivator for the season.
• Clean dirt, grass, and other materials from the entire unit.
• Wipe the tines with oil or spray them with a silicone lubricant to prevent rusting.
• oil the switch trigger cable and all visible moving parts. Do not remove the motor cover.
• order new parts to replace any that are badly worn or broken.
• Store in an upright position in a clean, dry place. Store with the handles in the extended
position, or loosen handle knobs and fold the handles down. Do not allow fingers nor
the switch trigger cable to become pinched when lowering the handlebar.

PREPARING FOR USE AFTER STORAGE

The following steps should be taken before using the tiller/cultivator after it has been stored.
• Unfold the handles into the upright position and secure them by tightening the handle
bar knobs. Do not allow the switch trigger cable to become pinched when raising the
handlebar.
• follow the steps to restart the tiller/cultivator.
23