Table of Contents
Advertisement
model no. 060-3783-4 | contact us: 1-866-523-5218
TINES INSTALLED CORRECTLY (SEE FIG. 4 - 5)
You may wish to install only two tines in order to till a narrow area. Proceed as follows.
Place tine A onto the shaft, and place tine D onto the other side shaft. insert the hitch pin into
the holes in order to secure the tines to the tine shaft. (fig. 5).
flute
D
C
!
NOTE: When the tines are installed correctly, the flute on
the tines should line-up, and the angled edge of the tine
blades should point towards the ground (Fig. 4).
!
NOTE: The tiller will not operate properly if the tines are
not installed correctly. If there is a problem with the tilling/
cultivating operation of the tiller/cultivator, check the tines
for proper positioning.
!
NOTE: The directional arrow that is displayed on each tine
should point toward the front.
!
WARNING: Never operate the tiller/cultivator without
the proper safety devices in place and working. Never
operate the tiller/cultivator with damaged safety
devices. Operation of this product with damaged or
missing parts could result in serious personal injury.
flute
Ring pin
b
A
Fig. 4
D
flute
17
A
Fig. 5
Hide quick links:
Advertisement
Table of Contents
