24
model no. 060-3783-4 | contact us: 1-866-523-5218
PRobLeM
The motor
fails to start
when the
switch trigger
is pressed.
Motor runs
but tines do
not move.
PoSSibLe CAUSe
The power cord is not plugged
in or the connection is loose.
Household circuit breaker has
tripped.
The tiller/cultivator circuit
overload protection has
tripped.
gear train failure.
SoLUTion
Plug in the power cord.
Check the circuit breaker.
Let the unit rest for 4 minutes,
then repeat steps to start.
Take unit to an authorized
service center.