Remote Control - M2TECH Young MKIII User Manual

YOUNG M III
K
DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER
REVISION P A – AUGUST 2017
R

4. Remote Control

Figure 3
The YOUNG MKIII comes with a fully-loaded remote control which
allows for setting all of its controls, as well as for controlling other
M2Tech Rockstars series products.
Below is a brief description of the relevant keys for the YOUNG M
Standby key: This allows for putting the YOUNG M
mode (prolonged push) and for awakening it.
DIM: Display dimming.
DAC: Instructs the remote to send commands using the DAC system
code.
PHASE: Analogue output phase toggle.
MENU: Configuration menu access.
ESC: Menu exit with changes discarded.
Cursor keys: Allow for menu navigation.
OK: Menu exit with changes stored.
VOL+/VOL-: Volume setting.
MUTE: Mute toggle on/off.
IN+/IN-: Input selection.
F+/F-: Functions setting, to set various parameters including balance.
FUNC: Functions recall.
Player Controls: these buttons are dedicated to the control of an
audio player running on the computer attached to the YOUNG MKIII.
The following commands can be sent: Play/pause, stop, next, track,
previous track
13
M2Tech
www.m2tech.biz
III.
K
III in standby
K
Copyright © 2017, M2Tech Srl