Using The Young Mkiii As Windows Predefined Audio Device - M2TECH Young MKIII User Manual

Highest resolution digital-to-analog converter digital

Hide thumbs Also See for Young MKIII:

Table of Contents

M2Tech

YOUNG M

III

DIGITAL-TO-ANALOG CONVERTER AND PREAMPLIFIER

REVISION P

A – AUGUST 2017

www.m2tech.biz

8.3.4. Using the YOUNG MKIII as Windows predefined audio device

When using certain players, such as Windows Media Player, or when listening to

streaming music from the Internet, it is necessary to set the YOUNG MKIII as the predefined

audio output device. To this purpose it is necessary to access the Audio Configuration

utility from the Windows Control Panel (Fig. 35).

Figure 35

Here the user must select "Young MkIII UAC2" as predefined device (as it's already been

done in the case shown in Fig. 35). From that moment on, every sound produced by

Windows or any application which relies on Windows to deliver its sound will be sent to the

YOUNG MKIII.

It is also possible to tell the operating system which sampling frequency and resolution are

to be used to operate the YOUNG MKIII. To this purpose, it is sufficient to click on the

"Properties" button, thus opening the window shown in Fig. 36.

Table of Contents

Do you have a question about the Young MKIII and is the answer not in the manual?