Advertisement
Quick Links
ES2010G-2GF
Full Gigabit Ethernet Switch
User manual
Shenzhen 3onedata Technology Co., Ltd.
Tel: +86-755-26702668 Fax: +86-755-26703485
www.3onedata.com
【Summarize】
ES2010G-2GF is a kind of full Gigabit unmanaged Ethernet
switch, it support 8 port 10/100/1000 Base-T(X) RJ45 Ethernet
and 2 port 1000 Base-FX optical fiber interface, DC power supply
(12-48VDC). It adopted no fan, low power consumption design,
IP40, corrugate high strength iron shell, the performance is more
steadily. The product accorded with CE, FCC standard and
Industrial 4 grades, DIN rail installation and wide operating
temperature (0~55 ℃ ), it can satisfied some kinds of industrial
environment, it can provide reliable and quickly solution for your
Ethernet device.
【Packing list】
The Gigabit Ethernet switch is shipped with the following items.
If any of these items are missing or damaged, please contact your
customer service representative for assistance.
Gigabit Ethernet Switch ⅹ 1
User manual ⅹ 1
DIN-Rail mounting kit ⅹ 1
Warranty card ⅹ 1
【Features】
Support
8
port
10/100/1000Base-TX
1000Base-FX (SC/ST/FC optional)
Support IEEE802.3/802.3u/802.3x/802.3z/802.3ab store and
forward
Ethernet port support 10/100/1000M self-adaption
Support redundant power input (DC12~48V), support
reverse connection protection
Support 0~55℃ working temperature
IP40 protect grade, high strength iron shell
DIN Rail installation.
【Panel layout】
Vertical view and bottom view
- 1 -
Side view
and
2
port
Front view
Advertisement
Related Manuals for 3onedata ES2010G-2GF
Summary of Contents for 3onedata ES2010G-2GF
-
Page 1: User Manual
【Summarize】 ES2010G-2GF is a kind of full Gigabit unmanaged Ethernet switch, it support 8 port 10/100/1000 Base-T(X) RJ45 Ethernet and 2 port 1000 Base-FX optical fiber interface, DC power supply (12-48VDC). It adopted no fan, low power consumption design, IP40, corrugate high strength iron shell, the performance is more steadily. -
Page 2: Dip Switch
【DIP switch】 1. DIP Switch Gigabit MDI (straight-through cable) 2. Power input terminal block (4 bits) 3. Ground screw 4. DIN-Rail mounting kit The switch provided 4 bits DIP switch to do function configure 5. 1000Base-FX fiber port (ON is enable), 1 is flow control, 2 is fiber port trunking, 3 is port 6. -
Page 3: Led Indicator
Suppose: If you make your own cable, we suggest labeling 1. Examine the DIN-Rail attachment too long, it cannot hold down other cable, but structure in the the two sides of the same line with the same letter (A-to-A and 2. - Page 4 Input voltage: 12～48VDC Type of input: 4 bit 7.62mm pitch terminal block No-load power consumption:3.9W@24VDC Full-load power consumption: 8.6W@24VDC Support reverse connection protection Working environment Working temperature: 0～55℃ Storage temperature: -10～65℃ Relative Humidity: 5%~95% (no condensation) Mechanical Structure Shell: IP40 protect grade, metal shell Installation: DIN-Rail mounting Weight: 450g Size (W×H×D): 50mm×115mm×80mm...