Status.request_Enable - Keithley 2657A Reference Manual

Model 2657A High Power System SourceMeter® Instrument Reference Manual
Also see
Questionable Status Registers
status.questionable.*

status.request_enable

This attribute stores the service request (SRQ) enable register.
Type TSP-Link accessible
Attribute (RW) Yes
Usage
requestSRQEnableRegister = status.request_enable
status.request_enable = requestSRQEnableRegister
requestSRQEnableRegister
Details
This attribute is used to read or write to the service request enable register. Reading the service request enable
register returns a value. The binary equivalent of the value of this attribute indicates which register bits are set. In
the binary equivalent, the least significant bit is bit B0, and the most significant bit is bit B7. For example, if a
value of 1.29000e+02 (which is 129) is read as the value of this register, the binary equivalent is 1000 0001.
This value indicates that bit B0 and bit B7 are set.
B7
**
1
* Least significant bit
** Most significant bit
2657A-901-01 Rev. B/December 2012
(on page E-13)
(on page 7-299)
Affected by
Status reset
The status of the service request (SRQ) enable register; a zero (0)
indicates no bits set (also send 0 to clear all bits); other values indicate
various bit settings
B6 B5 B4
> > >
0 0 0
Where saved
Not saved
B3 B2 B1
> > >
0 0 0
Section 7: TSP command reference
Default value
0
B0
*
1
7-307