Table of Contents
Advertisement
Section F: Option Parameters
F4 AO-08/AO-12 Option Set-up
F4-03 Analog Output Channel 2 Selection
Setting Range:
Factory Default:
Selects the analog output monitors for channel 2 of the AO-08 and AO-12 options.
F4-04 Analog Output Channel 2 Gain
Setting Range:
Factory Default:
Sets the channel 2 output gain for the analog output monitors. To obtain the output level, multiply the
monitor output level by the gain value set in F4-04.
F4-05 Analog Output Channel 1 Bias
Setting Range:
Factory Default:
Sets the channel 1 output bias for the analog output monitors. This is for the AO-08 and AO-12 option
cards.
F4-06 Analog Output Channel 2 Bias
Setting Range:
Factory Default:
Sets the channel 2 output bias for the analog output monitors. This is for the AO-08 and AO-12 option
cards.
70
Same as F4-01
Inverter output current (setting = "3")
0.00 to 2.50
0.50
-10.0 to + 10.0
0.0
-10.0 to + 10.0
0.0
AO CH2 Select
AO CH2 Gain
AO CH1 Bias
AO CH2 Bias
VS-616G5 Programming Manual
Open Loop
Flux
V/f
V/f w/PG
Vector
Vector
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Hide quick links:
Advertisement
Table of Contents
