Advertisement
....
I
"->
"->
Settino the Screen Disr,lav -
ON SCREEN SET Menu
,Ji~Mt;tlliig~•t,•:_.,.,
• ., .•
u·i····.····.··
This section explains the setting lists displayed in the
menu.
1be
lists are numbered and shown with indentations to
indicate the hierarchy in the menu.
If a setting in each list leads to another list or a
monitor operation, the list number or the operation is
indicated after the C,::. mark. (Settings without the C,::.
mark end in a single list.)
Select SET UP from the menu list.
CONTROL PRESET ADJ ...
COLOR TEMP ADJ~
MEMORY CARD ...
COPY ...
STATUS ...
MAINTENANCE ...
KEY PROTECT
OFF
Menu list
300
SET UP menu list: Choose the menu for setting the desired items.
INPUT CONFIGURATION menu
REMOTE menu
PASSWORD menu
SYSTEM CONFIGURATION menu
ALfGNMENT menu
600
ON SCREEN SET menu: Select items to be displayed on the screen.
VITC ... :
Select whether or not to display the VITC or user bit data contained in the input signal. C,::.
601
EDH ... :
Select whether or not to display the EDH error messages. ¢
610
CAPTION VISION ... :
Select whether or not to display the caption, and select the display mode. C,::.
620
ANCILLARY DATA:
Select whether or not to display the ancillary data in the serial digital signal
(OFF or ON).
CH NO ... :
Select the display mode of the channel number.¢
625
CH NAME ... :
Select the display mode of the channel name. ¢
625
VITC POSITION ... :
Select the display position for the VITC data. C,::.
630
EDH POSITION ... :
Select the display position for the EDH error messages. ¢
630
CH NO POSITION ... :
Select the display position for the channel number. ¢
630
CH NAME POSITION ... :
Select the display position for the channel name.¢
630
601
VJTC: Select whether or not to display the VITC and/or user bit.
[
VITC: OFF or ON
USER
BIT:
OFF or ON
610
EDH: Select whether or not to display the EDH error messages. If they are to be
displayed, select either ANALYZE MODE or WATCH MODE.
ERROR WARNING: OFF or ON
ANALYZE MODE: C,::. 611
WATCH MODE: C,::.615
611
ANALYZE MODE:
Detection results for each item is displayed. Select the items for
which you want to see
the
flag conditions.
EDH:
The result whether the input signal accommodates EDH (FOUND) or not (!NV ALID)
ACTIVE PICT: Results wiU be displayed (ERROR or NO ERROR).C,::. 612
FULL FIELD: Results will be displayed (ERROR or NO ERROR).C,::. 613
ANCI DATA: Results will be displayed (ERROR or NO ERROR).C,::. 614
612
ACTIVE PICT: Flag condition is displayed .
AP EDH:
ERROR or NO ERROR
AP EDA:
ERROR or NO ERROR
AP IDH:
ERROR or NO ERROR
AP IDA:
ERROR or NO ERROR
AP UES:
ERROR or NO ERROR
613
FULL FIELD: Flag condition is displayed.
FF EDH:
ERROR or NO ERROR
FF EDA:
ERROR or NO ERROR
FF IDH:
ERROR or NO ERROR
FF IDA:
ERROR or NO ERROR
FF UES:
ERROR or NO ERROR
614
ANCI DATA: Flag condition is displayed.
ANC EDH: ERROR or NO ERROR
ANC EDA: ERROR or NO ERROR
ANC IDH: ERROR or NO ERROR
ANC IDA: ERROR or NO ERROR
ANC UES: ERROR or NO ERROR
Advertisement
