Advertisement
.....
'
(11
Location and Function of Parts
8TaUylamp
With factory settings, the Tally lamp lights when pins
No. 3 and No. 8 of the REMOTE 2 connector on the
rear panel are connected. By changing the setting in
the REMOTE menu, different pins on the remote
connector can be used to control the tally lamp.
For information about the REMOTE menu, see "Assigning
the Remote Control Functions -REMOTE MenuZ".
8
OPTION
connector
(BVM-14ElE/14ElUn4FlE/14FlU/20ElE/
20ElU/20FlE/20FlU)
• OPTION
connector
(BVM-14ESE/14ESUn4FSE/14FSU)
Connector for future expansion.
8
OVER WAD lamp
(BVM-14ElE/14E1Un4FJE/14FlU/20ElE/
20ElU/20FlE/20FlU)
8
OVER LOAD lamp
(BVM-14ESE/14ESUn4FSEJ14FSU)
Lights to wam of CRT overload.
0
STANDBY lamp
(BVM-14ElE/14ElU/14FlE/14FlU/20ElE/
20ElU/20FlE/20FlU)
$
STANDBY lamp
(BVM-14ESEJ14ESUn4FSE/14F5U)
Lights when the monitor is in standby mode. The
monitor will be in standby mode under the following
conditions:
•The MAIN POWER switch (on the rear panel) is
turned on (the STANDBY lamp will blink for a few
moments after the switch is turned on).
• The monitor is changed from operation mode to
standby mode via the monitor control unit such as the
BKM-IOR.
C,POWERlamp
(BVM-14ElE/14EIUn4FlE/14FIU/20EIE/
20ElU/20FlE/20FlU)
0POWERlamp
(BVM-14ESE/14ESUn4FSEJ14F5U)
Lights when the monitor is put into operation mode by
an optional monitor control unit such as a BKM-IOR.
mm
When the STANDBY lamp
O
is blinking, the monitor
cannot be put into operation mode (internal data
initialization is taking place). Wait until the
STANDBY lamp
O
is steadily lit.
f)
POWER switch
(BVM-14ESE/14ESUn4FSE/14FSU)
Press to power the BVM-14E5E/14E5U/14F5E/14F5U
on or off. If your system includes more than one
monitor, you can use the ADDRESS menu to power a
selected monitor on or off, or to power all monitors on
or off at once.
For more information about the ADDRESS menu, see
··selecting the Monitor to Control -ADDRESS Menu".
8
DEGAUSS button
(BVM-14ESE/14ESUn4FSE/14FSU)
Press to manually degauss the monitor CRT. When
degaussing repeatedly, wait for
5
minutes before
pressing the button again.
(The
monitor CRT is
degaussed automatically each time the power is turned
on.)
0
Numeric keypad
(BVM-14ESE/14E5Un4FSEn4FSU)
Use the numeric keypad to enter menu settings and
channel numbers for signals that you want to input to
the monitor.
INPUT
000
0 0 0t-ototbUltona
000
y~&···--·-·
~
l.!:;JJ
~
number or character
{Iha
same
function wtth 1he ENTER bunon of the
Menu operation buttons •).
Doi
(-le)
button: Deletes a
number or character enl8f'8d .
C, MANUAL adjustment buttons and knobs
(BVM-14ESEn4ESUn4F5E/14FSU)
Each press of one of these buttons turns the button's
green LED on or off. When the corresponding button
is on (lit), you can rotate the knobs to adjust the
picture's contrast, brightness (black level), chroma,
and phase. These buttons are also used to enter
adjustment values from the menus.
You can use the CONTROL PRESET ADJ menu to
set preset values for each adjustment item.
For more information about the CONTROL PRESET ADJ
menu, See "Preset Adjustment of the Picture Uvel Control
Knobs -CONTROL PRESET ADJ Menu" .
Notes on using n SECAi,1 PAL D component
nnd
component
digital sys ten,
•The phase of component signals cannot be adjusted.
•The phase and chroma of RGB signals cannot be
adjusted.
r--
CONTRAST
adjustment
I
button and knob
---·---
BRIGHT adjustmenl
button and knob
1-----
CHROMA adjustment
button and knob
L__
PHASE adjustment button
and knob
(i)
Menu operation buttons (BVM-14ESE/14ESU/
14F5E/14F5U)
r
IIENU
button:
Press
to
display
monitor
UP
MENU
I
menus.
81.- ~--
U P, DOWN
buttons:
Poass to
select
sJ
B
menu Items
and
Hemsenlngs.
L
ENTER
bUtton:
Press
to
confinn
settings (the same functionwlth the Ent
button ol the numeric keypad
0).
For nwre information about using nwnitor menus, see
"Basic Menu Operations".
~
SHIFT button
(BVM·14ESM4ESUn4FSE/14FSU)
Each of the Function buttons
4D
has a Shift On
function as well as a Shift Off function. Press this
button to select Shift On or Shift Off functions.
Each time you press this button, its orange LED lights
(Shift On) or goes out (Shift Off).
Shift On: Use the function indicated on the right of
the Function button.
Shift Off: Use the function indicated on the left of
the Function button.
Advertisement
