Specify Ip Address Settings For The Switch; Use Browser-Based Access To Specify The Switch Ip Address - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E

Specify IP Address Settings for the Switch

By default, the switch IP address works as follows:
• If you cable the switch to a network with a DHCP server before you power on the switch, the DHCP
server assigns an IP address to the switch when the switch is powered on.
• If you power on the switch when it is not connected to a network with a DHCP server, the switch uses
its default IP address, which is 192.168.0.239.
You can disable the DHCP mode in the switch and enter static IP address and subnet mask values for
the switch as well as the address of the gateway device used by the switch.

Use Browser-Based Access to Specify the Switch IP Address

To specify IP address settings for the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5. In the DHCP Mode menu, select Disable.
Access the Switch Using a Web Browser
Manage Network Settings
12
on page