Change The Lan Ip Address Settings - NETGEAR RAX5 User Manual

Selecting the Disable SIP ALG check box disables the SIP ALG and clearing the
Disable SIP ALG check box enables the SIP ALG. By default, the SIP ALG is enabled.
6. Click the Apply button.
Your settings are saved.

Change the LAN IP address settings

The router is preconfigured to use private IP addresses on the local area network (LAN)
side and to act as a Dynamic Host Configuration Protocol (DHCP) server. We also refer
to the LAN IP address settings as the LAN TCP/IP settings.
The router's default LAN IP configuration is as follows:
• LAN IP address: 192.168.1.1
• Subnet mask: 255.255.255.0
These addresses are part of the designated private address range for use in private
networks and are suitable for most applications. If your network requires a different IP
addressing scheme, you can change these settings.
You might want to change these settings if you need a specific IP subnet that one or
more devices on the network use, or if you use competing subnets with the same IP
scheme.
To change the LAN IP address settings:
1. Launch a web browser from a computer or mobile device that is connected to the
router network.
2. Enter http://www.routerlogin.net.
A login window displays.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Setup > LAN Setup.
The LAN Setup page displays.
5. In the IP Address field, type the IP address.
6. In the IP Subnet Mask field, type the subnet mask of the router.
The IP address and subnet mask identify which addresses are local to a specific
device and which must be reached through a gateway or router.
Manage the WAN and LAN
Network Settings
4-Stream AX1600 WiFi 6 Router Model RAX5
86 User Manual