View Switch Information - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
The Switch Information page displays.
5. Select System > Monitoring > Mirroring.
6. In the Destination Port menu, select the destination port.
You can select a single destination port only. You cannot select a destination port that is a member of
a LAG.
7. In the Source Port section, select one or more source ports by selecting the check boxes that are
associated with the port numbers.
You can select more than one source port. You cannot select a source port that is a member of a LAG.
8. In the Mirroring menu, select Enable.
By default, mirroring is disabled.
9. Click the Apply button.
Your settings are saved.

View Switch Information

You can view the switch product name (model), MAC address, firmware level, DHCP mode, and other
network information.
To view information about the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
Manage and Monitor the Switch
58