48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
5.
Select System > Maintenance > Access Control.
6.
Select one or more devices.
To select all devices in the table, select the check box in the table heading.
7.
Click the Delete button.
The devices are removed from the table and your settings are saved. If you removed all devices from
the table, access control is disabled.
Set the Switch Management Mode
By default, you can manage the switch through a web browser and through the ProSAFE Plus Utility. You
can change the switch management mode so that only management through a web browser is enabled and
access through the ProSAFE Plus Utility is disabled. Even if you disable management through the ProSAFE
Plus Utility, the switch and its IP address on the network are still discoverable through the ProSAFE Plus
Utility.
To set the switch management mode:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4.
Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
5.
Select System > Management > Switch Management Mode.
The Switch Management Mode page displays.
6.
Select one of the following radio buttons:
Access the Switch Using a Web Browser
Manage Security
40
on page