Set Up A Link Aggregation Control Protocol Group - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E
10. Select System > LAG > LAG Configuration.
11. Select the LAG ID of the LAG for which you just set up the port membership.
12. In the Admin Mode menu, select Enable.
13. In the LAG Type menu, select Static.
The Port Member field for the selected LAG ID shows the ports that you selected in
The LAG Status field for the selected LAG ID shows whether the LAG is established (Up) or not
established (Down).
14. Click the Apply button.
Your settings are saved.

Set Up a Link Aggregation Control Protocol Group

The switch supports eight LAGs, which can be a combination of Link Aggregation Control Protocol (LACP)
groups and static link aggregation groups.
To specify an LACP group:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
4. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
Access the Switch Using a Web Browser
Manage Network Settings
19
Step 8.
on page