Download And Upgrade The Firmware - NETGEAR GS750E User Manual

48-Port Gigabit Ethernet Smart Managed Plus Switch Model GS750E

Download and Upgrade the Firmware

You can manually check for the latest firmware version for your switch by visiting downloadcenter.netgear.com.
To download and upgrade the firmware:
1. Visit downloadcenter.netgear.com.
2. Enter your product model number in the Enter a Product Name/Model Number field, search by clicking
the magnifying glass, and locate the firmware for your switch.
3. Download the firmware to your computer.
4. Read the new firmware release notes to find out if you must reconfigure the switch after upgrading
5. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
6. Launch a web browser.
7. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
6.
The login window opens.
8. Enter the switch's password in the password field.
The switch's default password is password.
The Switch Information page displays.
9. Select System > Maintenance > Firmware Upgrade.
The Firmware Upgrade page displays.
10. Click the Browse button and locate and select the new firmware image file.
11. Click the Apply button.
WARNING:
To avoid the risk of corrupting the firmware, do not interrupt the upgrade. For
example, do not turn off the switch or disconnect it.
When the upgrade is complete, your switch restarts. The upgrade process typically takes about three
minutes.
Access the Switch Using a Web Browser
Manage and Monitor the Switch
54
on page