12- or 24-Port 10-Gigabit/Multi-Gigabit Switch Models XS512EM and XS724EM
Specify IP Address Settings for the Switch
By default, the switch IP address works as follows:
•
If you cable the switch to a network with a DHCP server before you power on the switch, the DHCP
server assigns an IP address to the switch when the switch is powered on.
•
If you power on the switch when it is not connected to a network with a DHCP server, the switch uses
its default IP address, which is 192.168.0.239.
You can disable the DHCP mode in the switch and enter static IP address and subnet mask values for
the switch as well as the address of the gateway device used by the switch.
Use the Local Browser Interface to Specify the Switch IP
Address
To specify IP address settings for the switch using the local browser interface:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using
an Ethernet cable.
2.
Launch a web browser.
3.
In the address field of your web browser, enter the IP address of the switch.
The login page displays.
4.
Enter the switch password.
The default password is password. The password is case-sensitive.
The Switch Information page displays.
5.
In the DHCP Mode menu, select Disable.
The IP Address, Subnet Mask, and Gateway Address fields are enabled.
6.
Enter the IP address, subnet mask, and gateway address.
7.
Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Specify the Switch IP Address
The ProSAFE Plus Utility runs on Windows-based computers. You can install the utility to select additional
options to manage and customize the switch for your network. To download the utility, visit
netgear.com/support/product/PCU. You must use ProSAFE Plus Utility version 2.5.3 or a later version.
Manage Network Settings
40