Software Specifications; Radio Modes; Frame Of Radio Modes; Keypad Entry For Mode Startup - HYT TM-610 Service Manual

Software Specifications

Radio Modes

1.

Frame of Radio Modes

2.

Keypad Entry for Mode Startup

MODE Main Menu
USER Conventional
MODE Mode
ADJUST MODE
Model Set Mode
Firmware Version Display
Mode
Wired Clone Mode
PC Programming Mode
Note: When power-on password is enabled, you must input the correct password before you can enter User Mode.
You can input password through the keypad and press [#] to clear.
Display/Sub Menu
----------------------------
----------------------------
----------------------------
----------------------------
----------------------------
----------------------------
Operation
Turn on the radio to enter
Conventional Mode
Press and hold [P1] to turn the
radio on.
Press and hold [P2] to turn the
radio on.
While holding down [P4] key,
turn on the radio
While holding down [P3] key,
turn on the radio
Receive commands from PC
7
TM-610 Service Manual
Remarks