The External P5000I Digital Probe - Viavi MPOL*-85P User Manual

7 PCM & PROBE O
PERATION
T P5000 D
HE EXTERNAL I IGITAL
46
P
ROBE
1
2
3
4
Fig. 15 Patch cord microscope components
1 FMA-MTPA adapter
2 QuickCapture™ key
3 Focus control
4 Magnification control key
FMA series adapters for the PCM
SmartClass™ Fiber devices with the PCM use FMA series
adapters to ensure consistent and accurate inspection for a wide
variety of connectors and applications. All PCM configurations
ship with a 2.5 mm interface included. Kitted configurations may
include additional FMAE adapters.

The external P5000i Digital Probe

The P5000i Digital Probe is a portable handheld microscope
used to view and inspect both the bulkhead (female) and patch
cord (male) sides of fiber connectors, as well as other optical
devices, such as transceivers.
The Digital Probe is specially designed to fit and operate
comfortably and easily in-hand, allowing the user to inspect
hard-to-reach connectors that are installed on the back side of
patch panels or inside hardware devices. In order to support a
wide variety of fiber optic connectors, the P5000i provides an
exchangable FBPT inspection tip. The dedicated QuickCapture
key enables either instant triggering of a Pass/Fail test or
freezing of the live image. For best workflow adaption, the key
action is configurable. The dedicated Magnification Control key
provides fast toggling between two microscope magnification
MPOLx-85 / MPOLx-85P