Table of Contents
Advertisement
6.2 ALARM MOTION MANAGER
It is the set-up menu that connects and operates the exterior alarm device when any motion is detected
on each camera. The alarm can be selected and registered for each camera channel and total alarms
can be set up for each camera. For its set-up, move the cursor to each set-up line. Push the SEL
button to change to "▣" and it starts to operate.
6.3 ALARM SENSOR MANAGER
This menu assigns the alarm output for each sensor. It operates the assigned alarm output
device when input sensor is operated.
Users can assign each alarm output for each input sensor and assign the total alarm for each
input sensor through the set-up menu of ALL.
Digital Video Recorder User Guide
Figure 4-52
Figure 4-53
- 44 -
Advertisement
Table of Contents
