Table of Contents
Advertisement
Digital Video Recorder User Guide
5. SETUP – NETWORK
It sets up the network status of the DVR system.
Figure 4-39
5.1 TYPE
Users can select one of static IP, dynamic IP or PPPOE, as the set-up item on the network type. The
NETWORK TYPE is shown at Figure 4-40 and users can select one to set up.
Figure 4-40
5.1.1 STATIC
As the network environment that uses the static IP, it can be operated after inputting the information of IP,
SUBNET MASK, and GATEWAY. Figure 4-48 shows the set-up example for the static IP. Users can
input set points with the number buttons on the remote controller, after placing a cursor on each field.
The set-up of network is completed by pushing MENU button when the input of set points is finished.
- 37 -
Advertisement
Table of Contents
