Eyemax Triplex MPEG-4 DVR 9/16CH User Manual page 33

3.3.3 Options
For the recording mode by the motion or sensor detection, it sets up the pre-record time and post-record
time to start it from the time of the motion or sensor detection (Figure 4-29).
With the POP-UP screen feature, it displays the wanted channel in full screen.
The POST-RECORD TIME sets up the recording time in 10 seconds, 30 seconds, 1 minute, 5 minutes, or
10 minutes, after the motion or sensor detection (Figure 4-32) and automatically stores the image for the
set time after the detection.
Unlike the POST-RECORD TIME, the PRE-RECORD TIME stores the previous image from the time of
the motion or sensor detection. The duration of the image recording can be set up in NONE, 2, 4, 6, 8,
and 10 seconds.
The POP-UP SCREEN displays the image in full screen at the motion or sensor detection
(Figure 4-34).
Figure 4-31
Figure 4-33
Digital Video Recorder User Guide
Figure 4-32
Figure 4-34
- 33 -