Table of Contents
Advertisement
4. SETUP – STORAGE
It sets up the storage status of the DVR system.
This STORAGE Setup has an option to overwrite a new data over the existing data (Figure 4-38), when
there is no storage space for further image recording. This also confirms that the user wants to format a
hard disk and that the device is correctly connected. The progress of format is indicated on the screen
during formatting. The formatting progress doesn't include the storage device that is storing the current
image data.
This chart below see the status of HDD and CD-RW(DVD-RW) device.
This system supports HDDs up to 2 that are indicated as HDD–A, HDD–B, HDD-C and HDD-D.
- xxx G : HDD's Space capacity
- None : HDD is not installed or unavailable HDD is installed)
- N/F : It means NON-FORMAT and indicates that the disk is used for the first time or requires the format,
even though the device is recognized.
- CD-ROM : It mean that CD-ROM Drive installed in DVR system.
* You can format HDD while HDD status is "FULL" or "xx%" or "N/F"
Digital Video Recorder User Guide
Figure 4-38
- 36 -
Advertisement
Table of Contents
