Eyemax Triplex MPEG-4 DVR 9/16CH User Manual page 31

Digital Video Recorder User Guide
3.3.1 Motion Detection
Figure 4-26 Figure 4-27
The SUB-MENU is shown (Figure 4-26), when the MOTION DETECTION on the screen of Figure 4-27 is
selected. At the MENU, the sensibility on motion is set up from the level 0 to 9. To set up the sensibility,
place the cursor on the field number of the sensitivity and press the number from 0 to 9.
Figure 4-27 shows the setup on the motion field. The setup is divided into ALL, PART, and OFF. The
entire image of the channel is set up as the motion detection field, when the ALL is selected. The motion
detection field can be selected like Figure 4-28, when the PART is set up.
For this setup, place the box on the wanted block area of the image and press the SEL button to operate
the motion detection on the wanted block.
Figure 4-28
The motion field has 8 blocks on length and 8 blocks on height like Figure 4-31 and total 64 blocks can be
selected to operate this feature.
- 31 -