Eyemax Triplex MPEG-4 DVR 9/16CH User Manual page 4

THE OPERATION OF REMOTE CONTROLLER
1.NUMERIC
2.STATUS BUTTON
3.AUDIO BUTTON
4.BACKUP BUTTON
R-ID
5.P/T BUTTON
6.Z/F BUTTON.
7.REC BUTTON
8.R-ID BUTTON.
9.MENU BUTTON
10.SCROLL BUTTON
11.SEL (SELECT)
12.SEARCH
13.LOG
14.REW
15.PLAY/PAUSE
16.Forward/
Fast Forward
17.STOP
18.SPOT
19.PIP
20.POP
21.SEQUENCE
22.1 DIVISION
23.4 DIVISION
24.9 DIVISION
25.16 DIVISION
Digital Video Recorder User Guide
It inputs the set point and selects channels.
It displays the current status of the DVR system.
It selects the output by assigning the AUDIO Output
It stores the saved image in Back-up Media.
It operates the PAN/TILT and Zoom function of the camera.
It operates the ZOOM/FOCUS and Preset function of the camera.
It select/ un-select recording the input Images (Forced Recording).
It configure Remocon ID.(Range is from 00 to 99)
It displays MENU. It selects the item on the MENU category and has the
set-up and ending features.
It moves the cursor in the SELECT and MENU categories. It changes the
direction of PTZ.
It changes the selection and set-up on the menu categories.
It searches the stored images.
It displays the LOG to operate the DVR function.
It replays the search image backward up to 128 times faster and
supports the STEP Rewind function at the pause.
It plays/pauses the image during search.
It replays the search image forward up to 128 times faster and
supports the STEP Forward function at the pause.
It stops the playing process.
status is converted into Detection Mode.
SPOT Function Button (16CH Product Only)
It views the image from other CHs during monitoring the current image
from the camera. Small pop-up screen is displayed at the PIP Setup and
it can be adjusted Up-Down-Left-Right (16CH Product Only)
It detects the image in the assigned mode (16CH Only)
It displays the image in the Sequence for each channel.
It selects and detects each channel.
It divides the entire channel into 4 individual channels.
It divides the entire channel into 9 individual channels. This
function is applied on 9CH and 16CH product.
It divides the entire channel. This function is applied on 16CH
product.
When the stop button is pushed, the
- 4 -