CP100 GSM/GPRS/WIFI/GPS Tracker User Manual TRACCP100UM001 Revision: 1.01 http://www.queclink.com sales@queclink.com...
Page 2
TRACCP100UM001 General Notes Queclink offers this information as a service to its customers, to support application and engineering efforts that use the products designed by Queclink. The information provided is based upon requirements specifically provided to Queclink by the customers. Queclink has not undertaken any independent search for additional relevant information, including any information that may be in the customer’s possession.
850 / 1900MHz, its location can be monitored or periodically reported to a backend server or other device . Based on the embedded CP100@ Track protocol , the CP100 can communicate with the backend server through the GPRS/GSM/ WIFI network (or SMS) to report emergency alerts, low battery and scheduled GPS positions along with several other advanced reporting features.
Only Backend server developer administrator can use the Data_Cable_M to configure CP100 3.3. LEDs Description There are two LEDs in CP100, the description as following. light Event State Low Battery Battery voltage is lower than 3.8v Red Light Solid light Battery voltage is higher than 4.0v...
Page 8
CP100 User Manual Power key was pressed and prepare to power off Fast flash Abnormal Fast flash Power low alert Slow flash Power off or turn off the power light by command Dark On Charging Bule Light flash slowly Power Off...
PWR LED PWR LED will be Ever-light. You can also charge the battery by USB cable which connects CP100 with the PC. Charging time is about 5 hours. Note: Before the first time using CP100, please full charge the battery.
CP100 User Manual Finally, cover the slot. 4.4. Turn on/Turn off Turn on: Method 1: Press the Power key at least 3 seconds and release it to turn on CP100. At the same time, will light on. PWR LED Turn off: Method 1: Turn off device by manage tool ,use GTRTO ,parameter set to 5 (PWROFF).
Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use CP100 on the airplane or near medical equipment. TRACCP100UM001...