How To Create The Program - Crestron ST-1550 Operation Manual

SmarTouch STS Touchpanels
10 • • SmarTouch STS: Touchpanels
Block Diagram of ST-1550C

How to Create the Program

Configuration Manager
Use the Configuration Manager workspace (Project | Configure System) in SIMPL
Windows to select and configure all the devices that need to be included into the
system. For this example, add a CNRFGWA and ST-1550C to the system. The NET
ID of the CNRFGWA is set to 24 and the the RF ID of the ST-1550C is set to 10,
shown below.
NOTE: Consult the "Leading Specifications" on page 2 for the correct version of
SIMPL Windows. If using an early version of SIMPL Windows, Crestron
recommends a SIMPL Windows and operating system upgrade. The latest version
can be obtained from the Software Downloads page (Simplwin Library) of the
Crestron website (www.crestron.com). New users are required to register in order to
obtain access to the FTP site.
System View of the CNRFGWA NET ID Assignment in SIMPL Windows' Configuration
Manager
Crestron ST-1550 & ST-1550C
Operations Guide - DOC. 5803