The Schedule System Display; Touchpanel As Part Of Smartouch Sts - Crestron ST-1550 Operation Manual

SmarTouch STS Touchpanels

Touchpanel as Part of SmarTouch STS

8 • • SmarTouch STS: Touchpanels

The Schedule System Display

The schedule system display appears because of the command text specifier "N".
This command text is written in a border or button in the following format:
`N{Schedule Number},{Specifier}
The available schedule numbers are 0 through 31, where schedule 0 is the "scratch"
schedule. Refer to the table below for a description of the specifiers.
Table of Specifiers
SPECIFIER MEANING
0
1
2
3 Day of the Month
4
5
6
7 Day of the Year
8
9 12 Hour Time Type
10
11 Day of the Week
12 Type of Schedule
13 Join Number for that Schedule
EXAMPLE: To show the type of cycle for schedule #1, the command text in a
border or button would look like:
`N1,12
NOTE: As with all command text, formats as that shown above are the only text
allowed in the border or button.
This section of this Operations Guide and the next is to remind the reader that the
touchpanel provides user interface in either the Cresnet System or SmarTouch STS.
If the touchpanel is to be part of the SmarTouch STS, refer to the latest revision of
the SmarTouch STS Touchpanel User's Operations Guide (Doc. 5804) for
descriptions regarding the system's equipment and how to connect the panel in
programming and operation modes.
Crestron ST-1550 & ST-1550C
Seconds 0 to 59
Minutes 0 to 59
Hours 24 Hour Time, 0 to 23
1 to 31
Month 1 to 12
Year 4 Digit, i.e., 1996
Weekday 0 to 6
0 to 365
Hours 12 Hour Time, 1 to 12
AM or PM
Month 3 Characters: JAN, FEB, MAR,
APR, MAY, JUN, JUL, AUG, SEP,
OCT, NOV, DEC
3 Characters: SUN, MON, TUE,
WED, THU, FRI, SAT
Cycle Type: OFF, ONCE, DAILY,
WEEK, WKDAY, WKEND
Operations Guide - DOC. 5803
NOTES