Table of Contents
Advertisement
SmarTouch STS Touchpanels
12 • • SmarTouch STS: Touchpanels
into this program. View the symbol in detail view (alternatively CTRL+D or drag
and drop into Detail View). Assign signals as shown below.
Detail View of an Interlock in SIMPL Windows' Programming Manager
Loading a Program
REMINDER: Every network device within the Cresnet requires a unique identity
code (NET ID). These codes recognized by a two-digit hexadecimal number from 03
to FE. Matching NET IDs between touchpanel and VT Pro program is required if
new touchpanel screens are to be loaded.
To load a program, refer to the figures shown after this paragraph for typical
connection diagrams. Complete the following steps provided to ensure proper
connection to the system.
Typical Connection Diagram when Loading a Program from the ST-CP
15710 (PART OF ST-PK)
Typical Connection Diagram when Loading a Program from the CNMSX
ST-CBL (SOLD SEPARATELY)
CONTROL
SYSTEM
Crestron ST-1550 & ST-1550C
TOUCHPANEL
NOTE:
UNITS IN THIS ILLUSTRATION
ARE NOT DRAWN TO SCALE.
AC POWER PACK
(CRESTRON MODEL
OR EQUIVALENT)
PC
15717 (PART OF ST-PK)
SERIAL
PORT
USE ADAPTER
(PART OF ST-PK)
CONTROL
SYSTEM
TOUCHPANEL
NOTE:
UNITS IN THIS ILLUSTRATION
ARE NOT DRAWN TO SCALE.
AC POWER PACK
(CRESTRON MODEL
OR EQUIVALENT)
PC
SERIAL
PORT
Operations Guide - DOC. 5803
Advertisement
Table of Contents
