Table of Contents
Advertisement
Crestron ST-1550 & ST-1550C
Schedule Event #1 Page
Schedule Event #2A Page with Time
Adjust Subpage Open
Schedule Event #2A Page with Date
Adjust Subpage Open
Schedule Event #2A Page with Cycle
Adjust Subpage Open
Schedule Event #3A Page
Operations Guide - DOC. 5803
2.
Touch any button with a digital join number. Button may be one that
has a programmed sequence or one that initiates a specific function
(join number 1 through 999). In this example, the available buttons are
sequence buttons that are available from the Schedule Event #1 page,
shown to the left of this step.
NOTE: If the activation time is close to the current time, touch the Set
Event Time To Current Time button (join number 3360) to set the
"scratch" schedule time and date to the current time. Then use the
increment/decrement buttons as described in the next step to make
adjustments.
3.
To set the activation time for the event, touch the Adjust Time button
to open a subpage titled Time Adjust on the Schedule Event #2A page,
shown below. Use the increment/decrement buttons to increase and
decrease the hours, minutes, and seconds of the event. Each of these
buttons have reserved join numbers.
4.
Touch the Hide Time Controls button to close the subpage when the
activation time for the event is set.
5.
To set the activation date for the event, touch the Adjust Date button
to open a subpage titled Date Adjust on the Schedule Event #2A page,
shown to the left of this step. Use the increment/decrement buttons to
increase and decrease the year, month, and day of the event. Each of
these buttons have reserved join numbers.
6.
Touch the Hide Date Controls button to close the subpage when the
activation date for the event is set.
7.
The cycle of the event determines how often it occurs. To set the cycle
for the event, touch the Set Cycle button to open a subpage titled Cycle
Adjust on the Schedule Event #2A page, shown to the left of this step.
Available options for how often an event can occur are: Off (never
occurs), Once, Daily, Weekly, Weekdays, and Weekends. Each of
these buttons have reserved join numbers.
8.
Touch the Hide Cycle Controls button to close the subpage when the
activation cycle for the event is set.
9.
The event time and date have been properly set up in the "scratch"
schedule. Touch the Select Schedule button to open the Schedule
Event #3A page, shown to the left of this step. Notice that this page has
five schedules defined on the screen. To gain access to five more
schedules, touch the "More" button.
10. Determine the schedule that you want to use and touch that line. The
new schedule time, date, cycle, and join number appear automatically.
The event is now scheduled.
SmarTouch STS Touchpanels
SmarTouch STS: Touchpanels • • 7
Advertisement
Table of Contents
