15 Bryton App Advanced Settings; Gride Setting - Bryton RIDER ONE User Manual

Brtyon App Advanced Settings
After pairing your Rider one with Bryton Mobile App, you will have access to Grid Setting.
Grid Setting
You can customize your data page manaully, set your MHR, LTHR, turn on/o Smart Pause and set
Data Recording.
1. Pair Rider one with Bryton Mobile App
a. Turn on Rider one.
b. Go to your phone "Settings>Bluetooth" and enable Bluetooth.
c. Go to Bryton Mobile App and tap "Settings>User Settings>Device Manager".
d. Tap "+" and choose "Bluetooth 4.0".
e. Select and add your device by pressing "+".
f. Tap "Pair" to pair your device with your phone. (For iOS phone only)
g. Tap "Finish" to complete pairing.
2. Customize Your Data Page
a. Tap "Settings > Grid Setting" in Bryton Mobile App
b. Tap "OK" to con rm connection to Rider one.
c. Choose "Manual" for perfonal customization.
Choose "Auto" if you want to keep it at Default.
d. Tap left or right to change the number of grids.
e. Tap 1, 2, 3, 4, 5 to switch to di erent data page.
f. Tap data grid to change ride data.
3. Enter Your MHR and LTHR
a. Tap " " to enter settings.
b. Tap number next to MHR and LTHR to enter your MHR and LTHR value.
4. Turn On/O Smart Pause
Tap Smart Pause column to turn on/o smart pause.
5. Set Data Recording
Tap Data Recording column to set your desired settings.
6. Sync New Settings to Rider one
Tap left upper corner "<" and select "Sync" to sync your new settings.
Note:
• To change data grid back to default , go to
message pops up, tap "Yes" to con rm.
• To view step by step tutorial, please click below link.
Rider 10/one grid setting with Bryton app
and tap Data Page. "Back to default settings?"

15 Bryton App Advanced Settings