Enable Gps; Sensor Pairing - Bryton RIDER ONE User Manual

Enable GPS

If you are doing the indoor training, we would suggest you to turn o the GPS to avoid recording
incorrect track and distance data.
GPS

Sensor Pairing

You can pair Heart Rate Sensor, Speed Sensor, Cadence Sensor and Dual Sensor with Rider one.
Heart Rate
Speed /
Cadence/
Dual Sensor
Note:
• Please keep away from other BLE sensors during sensor pairing.
• After pairing, your Bryton devices automatically connect to Bryton Smart Sensors each time
when sensors are awake.
1. Press to enter settings.
2. Press to select "GPS" and press
3. Press to select "On or OFF".
4. Press to con rm selection.
5. Press to exit menu.
1. Press to enter settings.
2. Press to select "SYNC" and press
to enter the setting.
3. Press to select "Hr or SP-CA" and press
4. Wear Heart Rate Sensor or rotate crank and wheel a few
times to wake sensors up.
Note: The sensors can only be paired when they are awake,
or they would go back to sleep to preserve power.
5. Wait for pairing. When Rider one shows "YES", it means it
successfully detects one sensor, press
pairing, press to select "NO" and press
and pair again.
6. After completing pairing, press
to enter.
.
to con rm
to cancel
to exit menu.
13 Settings