Bryton Rider 100 - GPS Cycling Computer Quick Start Guide

Key Functions

1. BACK (): Press to return to the previous page or cancel an operation.
   When recording, press to pause recording. Press it again to stop recording.
   Press and hold to turn the device off.
2. LAP/OK (): Press to turn the device on. In Menu, press to enter or confirm a selection. In free cycling, press to start recording. When recording, press to mark the lap.
3. PAGE (): In Menu, press to move down to scroll through menu options. In Menu view, press to switch meter screen page.
   (Long press all three keys () at the same time to reset the device)

Getting Started

Before first use, please charge your device for at least 4 hours.

To begin

1. Press to turn on the device.
2. Press to select the display language and press to confirm the selection.
3. Device will search for satellite signals.
4. After GPS signal is fixed *, () just ride on and enjoy your workout in free cycling mode, and to record, press to start recording.
   *To get GPS acquisition, please take the device to an open sky outdoor environment.

Icon Description

1	Bike 1		Power Status		Notification
2	Bike 2		Heart Rate Sensor Active		Log Record in Progress
	No Signal (not fixed)		Cadence Sensor Active		Recording is paused
	Weak Signal (fixed)		Speed Sensor Active		Bluetooth function is enabled
	Strong Signal (fixed)		Dual Sensor Active

Please go to corp.brytonsport.com>Support>Tutorial for more instructions.
Please go to corp.brytonsport.com>Support>Download to do

Install Rider

Mount Rider to the Bike

Install Heart Rate Belt (Optional)

1. Remove battery tab before use
   
   
2. 
   
3. 
   

To prolong the life of your heart rate monitor, detach the sensor and clean the strap after every use.

Install the Speed/Cadence/Dual Sensor (Optional)

http://corp.brytonsport.com/products/support_sdownload