Recorder (Rec) - Tesla 32S307WH Operating Instructions Manual

ENG

RECORDER (REC)

IMPORTANT NOTES:
1. For any type of recording with this television, you must have connected an external device
to the appropriate USB port at the back of the television to record on.
2. The USB device must be FAT32 format.
3. For the first time using the USB device to record on the this TV, suggest to format the USB
device on the TV before you start the recording.
4. Make sure you are watching DTV program.
5. Use high-quality mobile device to record HD programs, otherwise the videos will be
jammed during the playback.
6. Back up all of the data in the USB storage device in case data was lost due to an
unexpected accident. We do not assume any liability for the losses by misuse or
malfunction. Data backup is consumer's responsibility.
Instant one-touch recording and playback
1. Please insert the an external high-speed storage device, and make sure the device has
enough free space.
2. Select the TV program and channel you wish to record.
3. Press REC button to enter into REC mode and start recording. REC control bar on the
screen shows as below, you can select the appropriate settings as your desire.
4. If the REC function can not be realized, try to format your USB device.
5. If you wish to stop the recording, press [
Note: (A) During the record mode, you cannot change channels or select another function.
(B) If the signal is interrupted or removed while in record, the recording will stop until
the signal is established. This may cause you to lose program content.
Timer recording
There are two ways to set the timer to record a television program.
If you know the programming details:
1. Go to the channel that will broadcast the program you want to record.
2. Press the EPG button on your remote control to bring up the EPG interface. The channel
you are watching will be highlighted on the screen that appears.
3. Press the RED button on the remote control, then enter into the program details on the
recorder menu by pressing
example, if the program starts at 8:30pm on the same day, enter: 30 in the space for
MINUTES, 20 in the space for HOURS (a 24 hour clock applies), and then the relevant date.
Use the same method for entering the finish time.
] button and the recording will stop.
/ to select an item and
14
/ to change the setting. For