ENG
PANEL BUTTONS
Rocker Button
Note: The images are intended for reference only.
Bottom view
Press middle button:
1. In standby mode, press it to turn on the TV;
2. Without OSD, short press it to access source menu; long press to turn the TV to standby;
3. With OSD, short press it to confirm a selection; long press it to return or exit.
Push left: decrease volume or go to left.
Push right: increase volume or go to right.
Push forward: channel up or go to above.
Push backward: channel down or go to below.
TERMINALS
Note: Please select the terminals according to your actual TV set.
1
Video & Audio L/R
2
HDMI1/MHL &HDMI2
3
DIGITAL AUDIO
4
EARPHONE
5
USB
6
LNB/AIR/CABLE
7
SERVICE
8
CI
Connect audio and video signal from signal source
such as DVD.
Connect HDMI input signal from signal source
such as DVD. HDMI1 supports MHL function.
Use a SPDIF cable to output the TV audio signal to
a compatible audio receiver.
Audio output, speakers will be muted when
earphone is plugged.
USB port
Connect a coaxial cable to receive signal from the
antenna, cable or satellite.
Debugging interface only for professional
technician.
CI card port.
10
Rocker Button