Side Ways 2 - Elenco Electronics SC3DMEG Instruction Manual

Project 90 Side Ways
Place all the parts on the base
grid, then the parts on the four
vertical snap wires. Turn on the
slide switch (S1); the lights turn
on, the fan spins, and the music
plays.
Project 91

Side Ways 2

Use the preceding circuit, but attach a 3D snap
on the back of the two vertical snap wires (V1)
connected to the clear motor (M4) and lamp
(L4). Attach the orange motor (M9) across the
two 3D snaps as shown. Mount the gear insert
and large gear on the orange motor.
Turn on the slide switch (S1). The lights turn on,
music plays, the fan spins, and the gear rotates.
-62-