Table of Contents
Advertisement
Installation information
Side-by-side
The appliance has two side-wall heaters
encased in foam and can be installed
side-by-side with other appliances.
Each appliance must be installed in its
own niche.
Please contact your dealer for specific
information about which combinations
will work with your appliance.
WARNING! This appliance must
be built in, otherwise it could tip up.
Install the appliance in accordance
with the installation instructions.
Risk of fire and damage! This
appliance must not be installed
underneath a cooktop.
Installation location
This appliance should be installed in a
dry, well-ventilated room.
This appliance should not be installed
where it is exposed to direct sunlight or
directly adjacent to a heat-producing
appliance such as a cooker, an oven or
a radiator, under a hob or near a
window in direct sunlight. The higher
the ambient temperature of the room,
the longer the compressor runs, and the
more energy the appliance requires to
operate. The appliance should be
installed in a dry, well ventilated room.
When installing the appliance, please
note:
– The electrical socket must be easily
accessible in an emergency, not
concealed behind the appliance.
88
– The plug and cord must not touch
the back of the appliance as they
could be damaged by vibrations from
the appliance.
– Do not plug in other devices behind
this appliance.
In environments with high
humidity condensation may appear
on the external surfaces of the
appliance.
Condensate can cause corrosion on
external appliance walls.
For prevention, it is advisable to
install the appliance with sufficient
ventilation in a dry and/or air
conditioned room.
After installation make sure that the
appliance door closes properly, the
air vents are not covered and that
the appliance has been installed in
accordance with these installation
instructions.
Advertisement
Table of Contents
