Changing the size of the ice
cubes
The size of the ice cubes depends on
the amount of water, which you can set
according to your requirements. To
make larger ice cubes, increase the
amount of water. The factory water
setting is medium (E3).
Setting the water quantity
This setting can only be selected if the
ice cube maker is on.
Touch the settings button.
All symbols available for selection will
appear on the display and the
symbol will flash.
Touch the buttons for setting the
temperature ( or ) repeatedly until
the symbol for the ice cube maker
flashes on the display.
Touch the OK button to confirm your
selection.
By touching the and buttons,
you can now select the water quantity
settings:
0: the ice cube maker is off
1: the ice cube maker is on
2: set the water quantity
3: select the ice cube tray cleaning
position
4: rinse the ice cube maker
Touch the OK button to confirm your
selection.
Making ice cubes
By touching the or button, you
can now set the water volume you
require (E1 to E8):
E1: low
E8: high
Touch the OK button to confirm your
selection.
The selected setting will be saved.
Touch the settings button to exit
settings mode or
close the appliance door.
The electronics will otherwise switch to
normal operation after approx. one
minute.
57