Table of Contents
Advertisement
Limiting the opening angle of the appliance doors
The door hinges are set ex factory to
allow the appliance doors to be opened
wide.
However, if the opening angle of the
doors needs to be limited for any
reason, the hinge can be adjusted to
accommodate this.
If, for example, the appliance doors
would otherwise hit an adjacent wall,
you should limit their opening angle to
approx. 90 °.
The locking pins for limiting the door
opening must be fitted before the
appliance is installed.
The refrigerator section door must be
removed in order to insert the pins into
the upper hinge of the freezer section
door.
Insert the pins supplied into the
hinges from above.
This will limit the opening angle of the
appliance door to approx. 90 °.
97
Advertisement
Table of Contents
