Table of Contents
Advertisement
Insert the water filter with the
depression facing downwards
towards the adapter .
Risk of damage!
Do not overtighten the union nut as
this can cause damage.
Connect the union nut to the
solenoid valve and tighten it.
If you want to move the water line by
90°, screw on the elbow .
For water lines with a 1/4" thread:
Connect the water line (e.g.
copper) to the adapter or elbow
using the clamping ring and nut .
For water lines with a 7/16" 24-UNS
thread:
Connect the water line directly to
the adapter or elbow (a
clamping ring and nut are not
required).
Secure the water line to the casing
using the retaining clip .
Slowly open the shut-off valve in the
water supply line and check the
whole water system for leaks.
The appliance can now be connected
to the power supply (see "Electrical
connection").
Take care not to bend or damage the
water line when pushing the
appliance into the niche.
Push the appliance into its final
position.
Plumbing
85
Advertisement
Table of Contents
