Installation Information; Side-By-Side; Location; Climate Class - Miele FNS37492iE Operating And Installation Instructions

To avoid tipping over, the appliance
must be properly installed and
secured.
WARNING!
Danger of tilting! To avoid a hazard
due to instability of the appliance, it
must be secured in accordance with
the instructions.

Side-by-side

The FNS 37492 iE refrigerator/freezer
has two side-wall heaters encased in
foam and can be built into separate
cabinet units arranged side-by-side
with all appliances.
Please contact your dealer for
specific information about which
combinations will work with your
appliance.

Location

This appliance should not be installed
where it is exposed to direct sunlight or
directly adjacent to a heat-producing
appliance such as an oven or a
radiator. The higher the ambient
temperature of the room, the longer the
compressor runs, and the more energy
the appliance requires to operate. The
appliance should be installed in a dry,
well ventilated room.
The following should also be taken into
consideration:
– The electrical socket must be easily
accessible in an emergency, not
concealed behind the appliance.

Installation information

– The plug and cord must not touch
the rear of the appliance as they
could be damaged by vibrations
from the appliance.
– Do not plug in other devices behind
this appliance.
Important! In environments with
high humidity condensation can
build up on the appliance exterior
and ultimately cause corrosion on the
outer walls.
To prevent this from happening, we
recommend installing the appliance
in a dry and/or an air-conditioned
room with sufficient ventilation.
Once you have completed the
installation, please make sure that the
appliance door closes properly, that
the ventilation openings are not
covered and that the appliance has
been installed as described.

Climate class

The appliance is designed for use
within a certain climate range (ambient
temperatures) and should not be used
outside this range. The climate range of
the appliance is stated on the data
plate inside the appliance.
Climate Room temperature
class
SN +50°F to +90°F (+10°C to +32°C)
N +60°F to +90°F (+16°C to +32°C)
ST +60°F to +100°F (+16°C to +38°C)
T +100°F to 110°F (+16°C to +43°C)
Operating in a room which is too cold
will cause the compressor to turn off for
too long, causing the internal
temperature in the appliance to rise
resulting in damage.
67