Changing The Size Of The Ice Cubes - Miele FNS 37492 iE Operating And Installation Instructions

Changing the size of the ice
cubes
The size of the ice cubes depends on
the quantity of water being taken in.
You are able to set this quantity accord-
ing to your wishes. To make larger ice
cubes, increase the amount of water
being taken in by the ice cube maker.
The amount of water is set to medium
(E3) at the factory.
Setting the water quantity
This setting can only be selected if the
ice cube maker is on.
 Touch the settings button.
All symbols available for selection will
appear on the display and the  sym-
bol will flash.
 Touch the buttons for setting the tem-
perature ( or ) repeatedly until the
symbol for the ice cube maker 
flashes on the display.
 Touch the OK button to confirm your
selection.
 By touching the  and  buttons,
you can now select the water quantity
settings:
0: the ice cube maker is off
1: the ice cube maker is on
2: set the water quantity
3: select the ice cube tray cleaning
position
4: rinse the ice cube maker
 Touch the OK button to confirm your
selection.
Making ice cubes
 By touching the  or  button, you
can now set the water volume you re-
quire (E1 to E8):
E1: low
E8: high
 Touch the OK button to confirm your
selection.
The selected setting will be saved.
 Touch the settings button to exit set-
tings mode or
 close the appliance door.
The electronics will otherwise switch to
normal operation after approx. one
minute.
39