D3 User Manual
C
onfiguring the Function Keys
F
unction Key Layout
Two layout types, line and tile, are available. The setting can be changed on the phone the D3 is
connected to and on the phone's web user interface.
Setting on the phone
1. Open the Settings menu of the phone that the module is connected to.
2. Press "1" to open the Preferences menu.
3. Press "5" to open the Display menu.
4. On the D375 and D315 press "3", on the D345 press "5" to open the Expansion Modules menu.
5. Press "1" to open Appearance.
6. Press "1", "2", or "3" to change the display layout of the respective expansion module.
◦
For example, if the display layout for module 1 is indicated as "lines" (Fig. 1), pressing "1" will
change and save the display layout for module 1 as "tiles" (Fig. 2).
Fig. 1
Fig. 2
◦
Alternative method: Use the up/down / arrows on the navigation key to select the
expansion module and press
7. Press
for 3 seconds to return to the idle screen.
Setting on the Web Interface of the Phone
1. Open the phone's web interface and click on Function Keys in the menu on the left side (see Fig. 4
on page 11.
2. Select tile or line layout from the drop-down menu of the respective expansion module.
to change it and save the change simultaneously.
12
Configuring the Function Keys