Step 8—Cable Placement - Enterasys RoamAbout RBT-1602 Installation Manual

8. Install the Kensington lock, if you plan to use one.
a. Loop the Kensington lock's cable around an object that cannot be moved or damaged by a
person pulling on the cable.
b. Insert the key into the Kensington lock.
c. Insert the Kensington lock into the security slot on the AP.
d. Rotate the key right or left to secure the lock to the AP.
e. Pull on the lock to verify that it is secured to the AP.
f. Remove the key.
9. As shown in Figure
slack that occurs in the cable between the bracket and the access point.
Figure 2-25 Step 8—Cable Placement
10. Lock the access point onto the bracket by inserting the 3‐mm or 1/8‐inch screwdriver into the
Lock hole on the access point as shown in Figure
Caution: To prevent possible damage to the access point, make sure the device is fully locked
onto the bracket before letting go of it.
Advertencia: para evitar posibles daños al punto de acceso, asegúrese de que el dispositivo
esté completamente fijo al soporte antes de soltarlo.
Achtung: Vergewissern Sie sich stets, dass der Access Point vollständig in die Halterung
eingerastet ist, um so Beschädigungen zu vermeiden.
2‐25, place the access point on the bracket, making sure to remove any
RBT-1602 and RBT-1602C Wireless Access Point Installation Guide 2-21
Cable
Universal mounting bracket
2‐26.
Installing the Access Point