How To Send The Data Out From The Meter - Lutron Electronics SL-4112 Operation Manual

9. HOW TO SEND THE DATA OUT
1) To send the data out from the meter, exit the
" Hold function " and the " Record function " first.
2) Press the " Send Button " ( 3-3, Fig. 1 ) at least 5
seconds until the lower display show " r232 ", then
release the button.
3) Push the " Send Button " ( 3-3, Fig. 1 ) once, the upper no.
will count up from 0 until reach the data logger storage no.,
at the same the storage data logger data will send out the
meter from the " RS-232 output terminal " ( 3-18, Fig. 1 ).
4) If intend up load the data to the computer, then
should connect the optional RS232 cable/UPCB-01 or
USB cable/USB-01 and cooperate the Data Logger
software ( optional, Model : SW-DL2005 ).
5) Press the " ESC Button " ( 3-4, Fig. 1 ) will escape the
data sending function.
108
r232
0
r232
21
The total data logger
no. that saved into
the memory.
Count up from 0 to
the data logger
storage no.